Tutorial: How to connect G7 HE

 

 

 

 

 

Connection:

Use the included Type-C cable to connect the handle to the device, and short press the Home button to power on.

Solid White=Connected

 

Volume Control:

1. Hold the M button + D-pad's Up/Down to increase/decrease the Master Volume. (11 levels in total)

*There will be a beep when adjusting to the maximum/minimum level.

 

2. Hold the M button + D-pad's Left/Right to increase game volume while decreasing voice chat volume/decrease game volume while increasing voice chat volume.

*There will be a beep when adjusting to the maximum/middle/minimum level.

 

3. Microphone Mute Function: When your headphone/earphone is plugged in, press the Microphone Mute Button, the indicator will become solid red and the Microphone Mute function is On. Press the Microphone Mute button again, the indicator will go out and the Microphone Mute function is Off (Default).

 

 

Back Buttons Setting:

 

1. Set R4/L4 button value: Hold the M+R4/L4 buttons simultaneously for 3s. When the indicator blinks slowly, tap the button you want to map to R4/L4. The indicator turns solid to indicate R4/L4 button value is set.

2. Cancel R4/L4 button value: Hold the M+R4/L4 buttons simultaneously for 3s. When the indicator blinks slowly, tap R4/L4 button. The indicator turns solid to indicate R4/L4button value is canceled.

 

Stick & Trigger Calibration:

1. Hold the View + Menu + Xbox buttons until the USB-C cable is inserted into the PC's USB port, then the indicator will slowly blink white.

2. Ensure that LT & RT and the left & right sticks are not touched. Then Press the A button. The indicator will go out.

3. Press LT & RT to their maximum travel. Rotate the sticks at their maximum angles for 3 times. Press the A button. The indicator becomes solid white to indicate the calibration is over.

4. After the calibration is over, it's required to unplug and re-plug the controller before using.