X1 FPS-DOCK Firmware Update Tutorial for Android

You can refer to the X1 tutorials to upgrade Z1.

Please note：
1. The devices used for X1 firmware update must be non-MTK-Chip Android mobile phones/tablets.
2. Please fully charge X1 and Android device before updating.
3. If the current firmware version of X1 is lower than 3316, please update X1 firmware to version 3316 via GameSir G-Crux APP.
4. This update includes two parts: Bluetooth firmware update and MCU firmware update.

Step 1  Please click the button below to download the FPSDOCK APP and enable the permission of pop-ups.

 
Step 2  Please connect X1 to mobile phone via Bluetooth.

Step 3  Launch FPSDOCK APP and click “Keep running in background”, when “New firmware detected, ready for upgrade ****” prompt pops up, please click “Confirm” button.

Step 4  Please do not turn off X1 during the firmware update, otherwise X1 will be damaged. It takes 5-10 minutes for the firmware to update. Please click “Confirm” button after the update is finished.

Step 5  Please disconnect X1 and delete the pairing data of X1 in Bluetooth setting. Then turn off FPSDOCK APP in the background.

Step 6  Please press the power button of X1 for 2 seconds, then press the power button for 0.5 second once again to turn off X1. Finally, please press the power button for 2 seconds to restart X1.

Step 7  Please connect X1 to mobile phone via Bluetooth and launch FPSDOCK APP. The APP will automatically upgrade MCU firmware. It takes about 3-5 seconds, please click “Confirm” button after the upgrade is finished.

 

Step 8  Please disconnect X1 and delete the pairing data of X1 in Bluetooth setting. Turn off FPSDOCK APP in the background. Then restart X1, and the update is complete.