My Cart

Close

Tutorial : How to use GameSir remapper A3

READ BEFORE USE

To activate mapping is to resolve the analogue stick and touchscreen not working at the same time, which is caused by launching G-touch or G-engine on Android devices. In a word, this is stable and fast solution to launch games.

Before activation you need to

Step 1 Download GameSir World App.

Step 2 Turn on [Allow display over other apps] in GameSir World

[Setting]>[App permission]>[GameSir World]>[Allow display over other apps]

Step 3 Turn on [USB Debug mode]

 [System]>[Developer options]>[USB debugging]

Step 4 Turn on [USB Debug mode]

 [System]>[Developer options]>[USB debugging],

 and click [USB Preferences]>[No data transfer].   

NOTE: If your mobile phone is Miui 8.0 or higher, you need to turn on [USB Security Setting]; if your mobile phone is Hauwei 7.0 or higher, turn on [Allow ADB debugging in charge only mode].

Activation

Step 1 Plug A3 into the port of the 5V charger, then A3 indicator will stay red.

Step 2 Connect A3 to the mobile phone via USB cable(as following picture shows).

Step 3 If the connection is completed, the on-screen will read “Allow USB debugging?”; click “OK”, and A3 will flash in green and be activated.

Step 4 When the activation is completed, A3 indicator will stay half-red and half-green, and GameSir World App will read “Mapping starts successfully”, then A3 can be removed.

Step 5 After Mapping activated, you can connect controllers to the mobile phone via GameSir World App.

NOTE: If your Android phone is powered off, and it need activating after powering on.

icons

x